X
ANHUI YUFENG EQUIMENT CO.,LTD.
OUR NEWS
Cautions before storing electric stackers
2019-05-09
First, thoroughly clean the electric stacker and check the brakes. Check the hydraulic oil level and add hydraulic oil as needed. Paint a thin layer of oil or grease to all mechanical parts that have not been painted.


First, thoroughly clean the electric stacker and check the brakes. Check the hydraulic oil level and add hydraulic oil as needed. Paint a thin layer of oil or grease to all mechanical parts that have not been painted.


Next,Lubricate the electric stacker according to the maintenance diagram and charge the battery regularly. Unplug the battery, clean the battery, and paint special grease to the motor bolts. If our electric stacker is out of service for more than 2 months, the stacker must be stored in a frost-free dry space. During the storage process, the stacker must be supported by a bracket and all wheels must be off the ground. Only in this way can make the wheel and wheel bearings be protected from damage during storage.

Finally, If the switching operation of the electrical system is difficult, the contact spray should be sprayed on the exposed contact surface and the oxide layer on the surface of the contact of the operating element should be removed by repeatedly performing the switching operation. After the electric stacker is put into use, the driver should immediately test the braking performance repeatedly.

Last article: Why using solid tires for electric forklifts
Next article: Hi! Here are something you have to know when you select electric forklift
Leave a Message
We believe in honest and direct communication. Please let us know your needs and we well do our best to support your